← Build journal

Conversion

Planning the Camper Bed

Planning a raised bed frame for my VW T5 camper conversion, with space underneath for storage, electrics and a pull-out cooking drawer.

I've been spending some time working out how I want the sleeping area in the back of the Transporter to work.

Rather than going with the usual U-shaped seating arrangement that converts into a bed, I've decided on a permanent raised bed platform.

The idea is to keep things simple while making the most of the available space underneath.

My current measurements are approximately:

  • 190cm long
  • 160cm wide
  • 74cm high

That should leave plenty of space below the bed for storage, a leisure battery and associated electrical equipment, plus a pull-out drawer for cooking.

I've been sketching different frame arrangements and looking at suitable timber. One option I'm exploring is using an IKEA SKORVA centre support beam, potentially combined with bed slats.

I'm also dealing with some leftover bolts from the van's previous rear seating arrangement. They're proving difficult to remove because I can't access them from underneath, so cutting them off may be the best solution.

There's still plenty of planning to do before I start building, but I'm starting to get a clearer picture of how the finished camper interior will work.

Status: Design and planning.