← Build journal

Upgrades

Wolfbox G900 Pro – Getting the Wiring Hidden

Installing a Wolfbox G900 Pro in my VW T5, hiding the rear camera and power cables through the roof, pillar trim and dashboard.

I've made some more progress with installing the Wolfbox G900 Pro digital rear-view mirror and dashcam in the T5.

Because my Transporter has barn doors rather than a tailgate, fitting the rear camera isn't quite as straightforward as it might be on other vehicles. I want the finished installation to look as close to factory-fitted as possible, with no visible cables running through the interior.

Running the Rear Camera Cable

I've now managed to run the rear camera cable from the front of the van all the way to the back.

White trunking running from front to back of van

Rather than leaving the cable exposed, I've routed it through conduit inside the roof, keeping it protected and completely out of sight.

The next challenge is getting the cable from the main body of the van into one of the rear barn doors.

My plan is to feed it through the existing barn door wiring loom, then route it down inside the door towards the number plate.

I'll need to drill a carefully positioned hole near the number plate to bring the cable outside, where the rear camera will eventually be mounted.

I'll also need to make sure the cable exit is properly sealed to prevent water getting inside the door.

Hiding the Power Cable

I've also made good progress with the power wiring.

The cable is now routed inside the headlining, down behind the pillar trim and into the dashboard, where I've taken it towards the fuse box.

This keeps the wiring hidden and avoids having a power cable dangling from the mirror or running across the dashboard.

What's Next?

The main jobs remaining are:

  • Route the rear camera cable through the barn door wiring loom.
  • Drill and waterproof the cable exit near the number plate.
  • Mount and position the rear camera.
  • Complete and test the power connection at the fuse box.
  • Check the camera image and adjust the viewing angle.

It's taking a little longer than simply running cables across the interior, but I think the effort will be worth it.

Once everything is installed, I'll have a much better view of what's behind the van, something that's particularly useful with the barn doors and limited rear visibility.

Status: Rear camera and power cables routed; final camera mounting and electrical connections still to complete.